DISC SPRING TOLERANCES
| Group | Thickness Range mm |
Thickness Range inch |
Tolerance mm |
Tolerance inch |
| 1 | less than 1.25 | 0.049 | +0.10 -0.05 |
+0.004 -0.002 |
| 2 | 1.25 to 2.00 | 0.049 to 0.078 | +0.15 -0.08 |
+0.006 -0.003 |
| over 2.00 to 3.00 | 0.078 to 0.188 | +0.30 -0.10 |
+0.012 -0.004 |
|
| over 3.00 to 6.00 | 0.118 to 0.236 | +0.30 -0.15 |
+0.012 -0.006 |
|
| 3 | over 6.00 to 14.00 | 0.236 to 0.551 | +/-0.30 | +/-0.012 |
(Note: The tolerances shown in the table are for M series of material C1075 or AISI 6150. For tolerances on other series, such as Stainless, SP, AL, etc. consult factory.)
Disc Spring Tolerances Index Home
| FAN DISC CORPORATION |
8127 Clybourn Avenue Sun Valley CA 91352 |
(818) 767-1886 · (818) 767-7415 FAX |
©Copyright 1997 Fan Disc Corporation |