DISC SPRING TOLERANCES
| THICKNESS RANGE | TOLERANCE FOR LOAD | |||
| GROUP | MM | INCH | At Deflection=.75h | |
| 1 | less than 1.25 | 0.049 | +25% -7.5% |
|
| 2 | 1.25 to 3.00 | 0.49 to 0.118 | +15% -7.5% |
|
| over 3.00 to 6.00 | 0.118 to 0.236 | +10% -5% |
||
| 3 | over 6.00 to 14.00 | 0.236 to .551 | +/- 5% | |
(Note: The tolerances shown in the table are for M series of material C1075 or AISI 6150. For tolerances on other series, such as Stainless, SP, AL, etc. consult factory.)
Disc Spring Tolerance Index Home
| FAN DISC CORPORATION |
8127 Clybourn Avenue Sun Valley CA 91352 |
(818) 767-1886 · (818) 767-7415 FAX |
©Copyright 1997 Fan Disc Corporation |