FAN DISC
  • Home
  • Spring Selection
    • Precision Belleville Springs >
      • .236 to .394
      • .472 to .492
      • .551 to .591
      • .630 to .709
      • .787 to .886
      • .906 to .984
      • 1.100
      • 1.240 to 1.340
      • 1.400 to 1.770
      • 1.970
      • 2.200 to 2.360
      • 2.480 to 2.800
      • 3.150 to 3.540
      • 3.940 to 4.410
      • 4.920
      • 5.510 to 7.090
      • 7.870
      • 8.860 to 9.840
    • AI Springs >
      • AI .187 to .950
      • AI 1.000 to 1.750
      • AI 2.000 to 2.500
    • SP Belleville Springs >
      • SP .197 to .945
      • SP 1.142 to 3.031
    • CONTACT Disc Springs >
      • CONTACT Narrow
      • CONTACT Regular
      • CONTACT Wide
    • K Disc Springs >
      • Metric for K
      • Inch for K
    • FL Disc Springs >
      • Metric for FL
      • Inch for FL
  • Special Springs
  • Spring Design
    • Tolerances >
      • for Thickness
      • Overall Height
      • Hardness Range
      • OD + ID Guide Clearance
      • OD + ID Tolerance
      • Load Tolerance
    • Load Calculations >
      • Nomenclature
      • Load in Lbs
      • True Radius Factor
      • Corner Radius Factor
      • True Cone Height Factor
      • Flattening at Edge Factor
      • Precise Load Computing
    • About >
      • Contact Us
      • News Releases >
        • Fan Disc Second Patent
        • JPL Selects Fan Disc
        • Fan Disc Wins Patent
    • Load and Stress Calculations
    • Dynamic Loading
    • Materials Properties
    • Tightening Torque Values
    • Typical Disc Spring Apps
  • Site Map

precision belleville springs

Request a Quote

Size .787 to .886

Precision Belleville Springs Index

.236 to .394
.472 to .492
.551 to .591
.630 to .709
.787 to .886
.906 to .984
1.100
1.240 to 1.340
1.400 to 1.770
1.970
2.200 to 2.360
2.480 to 2.800
3.150 to 3.540
3.940 to 4.410
4.920
5.510 to 7.090
7.870
8.860 to 9.840
Picture

Part numbers include M208206 M208207 M208208 M208209 M208210 M201005 M201008 M201009 M201010 M201011 M201013 M201015 M221106 M221108 M224113
Picture
Diameter in Inches 'D'
AI Disc Springs Sizes .236 to .394
Click to Enlarge
Materials Used: AISI - C0175 · ALLOY - 6150, INCONEL x 750 or 718, STAINLESS: 17/7 · AND STAINLESS 301 OR 302

Nomenclature: P Ld=load in lbs. Stress=stress in (psi) lbs/sq. in x 10³ f Deflection= deflection in inches

Notes: 1. Disc Springs are tested only at f=.75h 2. Stress value at .75h is tensile at Point 2 or 3, depending on which is higher.

Important Note: Disc springs of thickness greater than .236" (6mm) will automatically be supplied with reduced thickness and bearing flats as shown in this catalog. Disc springs of thickness .236" (6mm) are supported in full and reduced thickness as shown in this catalog; please make specific request.

Home | Spring Selection | Special Springs | Spring DESIGN | About | Request Quote

FAN DISC CORPORATION
​8127 Clybourn Avenue
Sun Valley CA 91352
Tel (818) 767-1886
Fax (818) 767-7415
​www.fandisc.com
[email protected]
Picture
​ISO 9001:2015 Certified
Copyright ©2020-2023 Fan Disc Corporation • Privacy Policy • Site Map
  • Home
  • Spring Selection
    • Precision Belleville Springs >
      • .236 to .394
      • .472 to .492
      • .551 to .591
      • .630 to .709
      • .787 to .886
      • .906 to .984
      • 1.100
      • 1.240 to 1.340
      • 1.400 to 1.770
      • 1.970
      • 2.200 to 2.360
      • 2.480 to 2.800
      • 3.150 to 3.540
      • 3.940 to 4.410
      • 4.920
      • 5.510 to 7.090
      • 7.870
      • 8.860 to 9.840
    • AI Springs >
      • AI .187 to .950
      • AI 1.000 to 1.750
      • AI 2.000 to 2.500
    • SP Belleville Springs >
      • SP .197 to .945
      • SP 1.142 to 3.031
    • CONTACT Disc Springs >
      • CONTACT Narrow
      • CONTACT Regular
      • CONTACT Wide
    • K Disc Springs >
      • Metric for K
      • Inch for K
    • FL Disc Springs >
      • Metric for FL
      • Inch for FL
  • Special Springs
  • Spring Design
    • Tolerances >
      • for Thickness
      • Overall Height
      • Hardness Range
      • OD + ID Guide Clearance
      • OD + ID Tolerance
      • Load Tolerance
    • Load Calculations >
      • Nomenclature
      • Load in Lbs
      • True Radius Factor
      • Corner Radius Factor
      • True Cone Height Factor
      • Flattening at Edge Factor
      • Precise Load Computing
    • About >
      • Contact Us
      • News Releases >
        • Fan Disc Second Patent
        • JPL Selects Fan Disc
        • Fan Disc Wins Patent
    • Load and Stress Calculations
    • Dynamic Loading
    • Materials Properties
    • Tightening Torque Values
    • Typical Disc Spring Apps
  • Site Map