FAN DISC
  • Home
  • Spring Selection
    • Precision Belleville Springs >
      • .236 to .394
      • .472 to .492
      • .551 to .591
      • .630 to .709
      • .787 to .886
      • .906 to .984
      • 1.100
      • 1.240 to 1.340
      • 1.400 to 1.770
      • 1.970
      • 2.200 to 2.360
      • 2.480 to 2.800
      • 3.150 to 3.540
      • 3.940 to 4.410
      • 4.920
      • 5.510 to 7.090
      • 7.870
      • 8.860 to 9.840
    • AI Springs >
      • AI .187 to .950
      • AI 1.000 to 1.750
      • AI 2.000 to 2.500
    • SP Belleville Springs >
      • SP .197 to .945
      • SP 1.142 to 3.031
    • CONTACT Disc Springs >
      • CONTACT Narrow
      • CONTACT Regular
      • CONTACT Wide
    • K Disc Springs >
      • Metric for K
      • Inch for K
    • FL Disc Springs >
      • Metric for FL
      • Inch for FL
  • Special Springs
  • Spring Design
    • Tolerances >
      • for Thickness
      • Overall Height
      • Hardness Range
      • OD + ID Guide Clearance
      • OD + ID Tolerance
      • Load Tolerance
    • Load Calculations >
      • Nomenclature
      • Load in Lbs
      • True Radius Factor
      • Corner Radius Factor
      • True Cone Height Factor
      • Flattening at Edge Factor
      • Precise Load Computing
    • About >
      • Contact Us
      • News Releases >
        • Fan Disc Second Patent
        • JPL Selects Fan Disc
        • Fan Disc Wins Patent
    • Load and Stress Calculations
    • Dynamic Loading
    • Materials Properties
    • Tightening Torque Values
    • Typical Disc Spring Apps
  • Site Map

disc spring load calculations

Request a Quote

Load in Lbs at a Given Deflection and Flat Theoretic Formulas

Disc Spring Load Calculations Index
  • Nomenclature used in spring calculations
  • Load in Lbs at a Given Deflection and Flat theoretic formulas
  • True Radius Factor Shape of the actual edge has an impact.
  • Corner Radius Factor A spring does not have square corners
  • True Cone Height Factor The flat area at the middle of the spring
  • Flattening at Edge Factor The flat area at the edge of the spring
  • Precise Load Computing Program​​
Load in Lbs at a Given Deflection
Note: The load-deflection formulas were developed by J. Almen and A. Laszio, and published in the Transactions of American Society of Mechanical Engineers, May 1936, and is shown in the figure above.

Home | Spring Selection | Special Springs | Spring DESIGN | About | Request Quote

FAN DISC CORPORATION
​8127 Clybourn Avenue
Sun Valley CA 91352
Tel (818) 767-1886
Fax (818) 767-7415
​www.fandisc.com
info@fandisc.com
Picture
​ISO 9001:2015 Certified
Copyright ©2019 Fan Disc Corporation • Privacy Policy • Site Map
  • Home
  • Spring Selection
    • Precision Belleville Springs >
      • .236 to .394
      • .472 to .492
      • .551 to .591
      • .630 to .709
      • .787 to .886
      • .906 to .984
      • 1.100
      • 1.240 to 1.340
      • 1.400 to 1.770
      • 1.970
      • 2.200 to 2.360
      • 2.480 to 2.800
      • 3.150 to 3.540
      • 3.940 to 4.410
      • 4.920
      • 5.510 to 7.090
      • 7.870
      • 8.860 to 9.840
    • AI Springs >
      • AI .187 to .950
      • AI 1.000 to 1.750
      • AI 2.000 to 2.500
    • SP Belleville Springs >
      • SP .197 to .945
      • SP 1.142 to 3.031
    • CONTACT Disc Springs >
      • CONTACT Narrow
      • CONTACT Regular
      • CONTACT Wide
    • K Disc Springs >
      • Metric for K
      • Inch for K
    • FL Disc Springs >
      • Metric for FL
      • Inch for FL
  • Special Springs
  • Spring Design
    • Tolerances >
      • for Thickness
      • Overall Height
      • Hardness Range
      • OD + ID Guide Clearance
      • OD + ID Tolerance
      • Load Tolerance
    • Load Calculations >
      • Nomenclature
      • Load in Lbs
      • True Radius Factor
      • Corner Radius Factor
      • True Cone Height Factor
      • Flattening at Edge Factor
      • Precise Load Computing
    • About >
      • Contact Us
      • News Releases >
        • Fan Disc Second Patent
        • JPL Selects Fan Disc
        • Fan Disc Wins Patent
    • Load and Stress Calculations
    • Dynamic Loading
    • Materials Properties
    • Tightening Torque Values
    • Typical Disc Spring Apps
  • Site Map